NuScope™

The Nuscope™ is a USB microscope attachment for imaging thin films, microelectronic circuits, mineral inclusions, pigments in art work, identification of narcotics and plastic explosives, and biological tissues. The NuScope is attached with 7/64 Allen wrench. Illumination of the sample surface is obtained with an attached LED light ring that plugs into a connector on the front of the spectrometer. The surface image is viewed in real-time with a color video camera using USB Shot software, which allows movie and screen capture. Coarse focus is achieved on the specimen with manual adjustment, and fine focusing is obtained by a focus adjust knob to render a sharp image. Third party rack and pinion microscope stages are used to assist in focusing and transversing the sample across the field of view (FOV). The field of view is approximately 800µm at 100x focal power.

Advantage Series and Inspector Raman Glass Sample Holder

The Glass Sample Holder comes standard with all instruments. It is mounted on the exit port with Allen screws and it is used for sampling liquids, emulsions and powders through 8mm vials. Inserts are provided for the analysis of liquids and crystals through NMR tubes and MP tubes. The focusing knob is used to optimize the Raman signal. The most intense Raman signal is obtained as the focal length is optimized just beyond the glass interface.

Advantage Series Right Angle Input Optics

The Right Angle Input Optics allows for horizontal sampling. This guides the exit/collection beam of the spectrometer at a 90 degree angle toward the sample. The focal length of the Right Angle Input Optics is approximately 16.45 mm.

Input Optics Extension

The Input Optics Extension incorporates objectives that extend the exit beam and collection signal 5 inches beyond the instrument. This allows the instrument to access the sample in congested sampling areas. The focal point is approximately 16.45 mm beyond the Input Optics Extension.

Inspector Raman Point and Shoot

The Point and Shoot attachment is used for rapid and efficient analysis of solids. It is mounted on the sampling nose with a simple set screw. The laser focal point (7.8 mm) extends to the end of the Point and Shoot for simple and efficient focusing. For outside use, a black shroud is inserted over the Point and Shoot to minimize ambient light effects.

XYZ Stand

The XYZ Stand is used for portable Raman systems. The XYZ platform is magnetized for removal of the stage. The XYZ stage features 116mm x 137mm work surface with stage clips, 50mm x 75mm x-y travel, and 0.1mm graduations.

Regular and Extended Warranties

Our limited warranty covers defects in workmanship or materials under normal use for twelve months from date of shipment. The limited warranty does not cover non-DeltaNu branded products and accessories. The extended warranty extends all terms of the limited warranty to three (3) years from date of shipment from DeltaNu. The extended warranty offers additional PC protection and accidental coverage related to normal handling procedures.